Use And Care Manual

14
Assembly Instructions
11
12
Wheel assembly
Install the wheels on the frame legs as shown below.
Tighten the wheels with a screwdriver and small wrench (N).
C
Hardware Used
Axletree : x2
Hardware Used
Assembly of frame rail B
1. As shown below, insert the frame rail into the mounting hole of the rear beam
and rotate by 90 degrees.
F
M6 Nut : x2
J
Axle Washer : x2
2. As shown below, insert the other end of the frame rail into the mounting hole
of the front plate and fix it with the R bolt.
L
R pin : x1
Fig.15
Fig.16
1、如下图，将车架档杆插进后横梁的安装孔内，并旋转90度。
11.车轮的装配
如下图，将车轮安装在车架支腿上。
12.车架档杆B的装配
2、如下图，将车架档杆的另一端插进前板的安装孔内，并用R插销固定。
N
Small Spanner : x1