Use And Care Manual

15
Assembly Instructions
13
14
Assembly of furnace body
As shown below, the furnace body assembly is mounted on the frame and fixed
with M6x60 screw.
A
Hardware Used
M6x60 : x8Screw
Hardware Used
Assemble the furnace on the left, the table on the right and the
panel on the right
As shown below, install the corresponding decorative plate on the left furnace and
the right platform and tighten it with M4x8 screws.
G
M4x8 : x8Screw
Fig.17
Fig.18
如下图，将左边炉、右边台安装相应的装饰板，并用M4x8螺钉紧固。
13.炉体总成的装配
如下图，将炉体总成安装在车架上，并用M6x60螺钉固定。
14、左边炉、右边台和装饰板的装配