Use And Care Manual

31
CARE AND MAINTENANCE
IMPORTANT: When connecting or replacing gas pipe or fittings,all joints
must be sealed with approved leak-proof sealing compound
or plumbers tape.After making connections,check all joints
for leaks using a soapy water solution and a brush.
WARNING:Never use an open flame to test for gas leaks.Use of an open
ame could result in a fire,explosion and bodily harm.
Burners
Burners are made of stainless steel and can be soaked in water and cleaned
with a brass wire brush or a stiff bristle brush.Check every port hole for clogs.
Use a wire pin(smaller than the port)to clean clogged ports.Do not enlarge
any ports .Make sure the burners are dry before installing them back to the
grill.See Fig.37
Air Shutter
Fig.37
示:在
告:切使使
便则:
Spiders and insects can nest inside the burners of this or any other grill and
cause the gas to flow from the front of the burner.This could cause a fire to
occur behind the valve panel,thereby damaging the grill and making it unsafe
to operate.Inspect the burners at least once a year or immediately after any
of the following conditions occur:
1.The smell of gas in conjunction with the burner flames appearing yellow.
2.The grill does not reach temperature.
3.The grill heats unevenly.
4.The burners make popping noises.
使使查:
1
2
3.
4
Drip Tray
The drip tray collects excessive grease runoff and fallen food particles.
Allow the tray and its contents to cool before cleaning.Slide the tray out and
wipe it clean.
Make sure the tray is installed before using the grill.
It is highly recommended that you check the tray regularly to avoid any
possibility of a grease fire; however,most of the drippings will vaporize back
into the cooked item giving you an outdoor grilled flavor.
性;然