Use And Care Manual

Assembly Instructions
1
2
Assembly of front plate beam and front plate
Assembly of front plate beam and front plate is shown below. Install the front plate
beam on the back of front plate and tighten it with M6x12 screws at the bottom of
front plate.
B
Hardware Used
M6x12 : x2
B
Hardware Used
M6x12 : x8
Assembly of front leg and front plate
As shown below, install the left front leg and right front leg with the front plate and
tighten with M6x12 screws.
Fig.5
Fig.6
1.前板横梁和前板的装配
如下图，将前板横梁安装在前板背面上，并用M6x12的螺钉从前板底部紧固。
2.前支腿和前板的装配
如下图，将左前支腿和右前支腿与前板安装在一起，并用M6x12的螺钉紧固。
9
Frame leg
1#
Frame leg
2#