Installation Sheet

ASSEMBLY INSTRUCTIONS
ITEM NO.: 1-801-5-02
B
A
C
A1
screws
Connecting
wire
From fixture
From junction box
From fixture
Fig. 1
B → A → C
1. Carefully unpack and identify all parts referring to the illustration for parts identification.
2. Turn power to the installation point OFF.
3. The wires through character line deduction (A1) to the length you like, and secure with screws.
4. Unthread the screws (B) from cap of the fixture body (A), then line up the lock hole on the cap of
fixture body (A) and the hold on the glass (C), then thread the screws (B) in to the lock hold on the
cap of fixture body (A) to assembly the glass (C). Hand tighten until sung.
5. Install proper bulbs (not provided) to each socket referring to the markings and / or labels on the
fixture for maximum wattage.
6. Connect the wire as Fig. 1.
7. Referring to the installation instruction with the product for the installation.
8. Restore power to the installation point ON. Retain this sheet for future reference.