Installation Sheet

CANOPY (1)
BALL NUT (2)
HOOK (3)
ARM (4)
HOOK (7)
TUBE (5)
GLASS PANEL (8)
LANTERN (10)
LIGHTING
INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the above
illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the glass panel (8) onto lantern (10), then secure them with thumb screw (9).
3.Install the arm (4) onto hook (7),hook (3). Install the tube (5) onto socket (6).
4.The fixture is assembled!
ITEM NO: 6-3042-4-13