Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTION
Please read carefully and save this instruction, as
you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock. If you are unfamiliar with proper
electrical wiring connections, please consult of a qualified electrician
before installing
Installing Step:
Remove the fixture and the mounting package from the box and make sure that no parts
missing in the box.
1. Screw the Ball Nut (2) onto the Canopy (1) tightly.
2. Thread the Poly Column (3) onto the Nipple (4) tightly, then thread the Tube (7)
onto the Nipple (6) and the Nipple (8) tightly.
3. Install bulbs: (Bulbs not including in the package)
(Please don’t exceed the maximum capacity that recommended on the Sockets)
4. The Wood Bead (A) have been hung onto the hole of the Metal Ring (9) and the
other side hang it onto the hole of the Metal Ring (5) ; Hang the Wood Bead (B)
onto the holes of the Cap (10) and the Finial (11) .
INSTALLATION IS NOW COMPLETED.
6-5092-3-82
NIPPLE (4)
POLY
COLUMN (3)
METAL RING (5)
NIPPLE (6)
TUBE (7)
NIPPLE(8)
METAL RING (9)
CAP (10)
WOOD BEAD (A)
44 PCS (INCLUDING
SPARE PARTS 4PCS)
FINIAL (11)
WOOD BEAD (B)
7PCS