Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTION
Please read carefully and save this instruction, as you
may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in
order to prevent possible shock. If you are unfamiliar with proper electrical
wiring connections, please consult of a qualified electrician before installing
Installing Step:
Remove the fixture and the mounting package from the box and make sure that no parts
missing in the box.
NOTE：THIS FIXTURE IS CONVERTIBLE TO PENDANT OR SEMI-FLUSH
1. Difference between Pendant and Semi-flush is the quantity of the Tube.
2. Thread Center Rod (12) onto Nipple (13), put metal flat to the Nipple (14), and
screw it with Ring Nut (4).
3. For Pendant please thread the Tube (6) onto Nipple (14), then connect all the
Tubes together, On the other end thread Swivel (3) onto Tube (5).
4. For Semi-Flush please thread Tube (6) onto Nipple (14), thread Swivel (3) onto
Tube (6) directly.
5. Attach the Glass (11) to the Fixture body, and screw them with Ball Nut (7), Rubber
Washer (8) and Finial (9).
6. Use Ball Nut (2) to thread Canopy (1) onto ceiling tightly.
7. Install bulbs: (Bulbs not including in the package)
(Please don’t exceed the maximum capacity that recommended on the Sockets)
INSTALLATION IS NOW COMPLETED.
6-7110-4-SN
6-7110-4-89
6-7110-4-322
CANOPY(1)
BALL NUT(2)
SWIVEL(3)
TUBE (5)
6"
TUBE (
6
)
CANOPY(1)
BALL NUT(2)
SWIVEL(3)
GLASS (11)
(FOR SEMI-FLUSH)
(FOR PENDANT)
BALL NUT (7)
RUBBER WASHER(8)
FINIAL (9)
RING NUT(4)
NIPPLE(13)
CENTER ROD(12)
6"
TUBE (
6
)
NIPPLE(14)
SOCKET(10)
GLASS (11)
CENTER ROD(12)