Installation Sheet

ITEM NO: 6-8502-3-322

8502

LIGHTING

INSTALLATION INSTRUCTIONS

1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the

above illustration. Make sure not to misplace any parts that are needed for the installation;

2.Assemble the tube (3) together using the nipple (4), then attach the bottom end of tube (3) onto the

coupling (5) tightly, then secure the swivel (2) onto the tube (3).

3.Install the nipple (8) into the coupling (6), then secure them with hex nut.

4.Install the tube (9), cover (11), rubber washer (10), glass panel (12), rubber washer (13) and steel

washer (14) into the nipple (8), then secure them with hex nut (15).

5.Install the cover (16) into the nipple (8), then secure them with wheel (17).

6.Fixture is ready for lamping and installation.

BALL NUT (1)

SWIVEL (2)

TUBE (3)

NIPPLE (4)

COULING (5)

COULING (6)

SOCKET (7)

NIPPLE (8)

TUBE (9)

RUBBER WASHER (10)

COVER (11)

GLASS PANEL (12)

RUBBER WASHER (13)

STEEL WASHER (14)

HEX NUT (15)

COVER (16)

WHEEL (17)