Installation Sheet

ASSEMBLY INSTRUCTIONS
ITEM NO.: 7-15000-1-126/ 7-15000-1-123
ASSEMBLY STEPS:
E→D→A→ B→ C
1. Carefully unpack and identify all parts referring to illustration for parts identification.
2. Turn the power to the installation point OFF.
3. First, adjust the lampshade and the wire to the proper position Then the lock screw (E)
4. Lock the pipe(D) on the lamp body
5. Two mounting screws (A) are fastened to the back Mounting Strap(C) through Two hole in the
canopy (B).
6. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on the fixture
for maximum wattage.
7. Restore the power to the installation point ON.
8. Assembly is completely. Retain this sheet for future reference.