Installation Sheet

ASSEMBLY INSTRUCTIONS

ITEM NO.: 7-2138-4

chain

hook

B → A → C → D → BULB → E

1. Carefully unpack and identify all parts referring to illustration for parts identification.

2. Turn the power to the installation point OFF.

3. Unravel the supply power and ground wires and pass them through the center holes of

center tube (B), (C) and loop assembly (D).

4. Thread the bottom of center tube (B) onto the socket assembly (A). Repeat the process for

remaining center tube (C) as shown in the diagram, until snug.

5. Install the loop assembly (D) onto the top of center tube (C).

6. Referring to the installation instruction with the product for the wiring and installation.

7. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on

the fixture for maximum wattage.

8. Place the glass shade (E) over the socket assembly (A) and meantime carefully place the

chain of the loop assembly (D) to the hook of the glass shade (E) as shown in the diagram.

9. Restore the power to the installation point ON.

10. Assembly is completely. Retain this sheet for future reference.