Owner manual
78 SawStop 10” Industrial Cabinet Saw
Featherboard Construction
This diagram illustrates a typical featherboard. Featherboards
should be constructed from good quality wood that is free of
knots. Use Featherboards to help keep the material being cut in
contact with the table, and to help prevent kickback. Do not use
featherboards when cutting with the miter gauge.
1 inch squares.
Featherboard should be approximately
3
/
4 inch thick.
7 3/4"
4"
24"
1/4"
1/8"
60°
Industrial Cabinet Saw Rev. 2 Ma78 78 3/9/2010 8:39:06 AM