Instructions / Assembly

SHOWER RENEWAL KITS

INSTRUCTIONS

Step 1: Remove all the parts from the box

Step 2: Using a at object pry loose the handle

cap (A). Then remove the screw holding the

handle, remove handle, escutcheon and

escutcheon holder (B)

Step 3: Using a penetrating oil or water

displacing spray, coat the area where the

existing stem is installed to the valve.

Step 4: Use pliers to remove the installed

cartridge (C) and the tool included with the

renewal kit to remove the seat(D). Repeat these

steps for both Hot, Cold and diverter strems

and seats.

Step 5: Install the new parts. Remove existing

showerhead (E) and replace with new shower-

head.

TWO AND THREE HANDLE

KITS AVAILABLE:

KIT308C for 308-2.0 or 308L-2.0

KIT208C for 208H-2.0 or 208HL-2.0

SEAT REMOVAL TOOL

INCLUDED

Parts included in the Renewal Kit - KIT308C for

three handle shower replacement

Tools and Materials needed:

Flat Head Screwdriver

Phillips head screwdriver

Pliers

Plumber’s putty (tape)

OLD SAYCO 308

NEW SAYCO 308C

Parts Breakdown

A: Handle Cap

B: Stem Screw

C: Stem

D: Seat

E: Shower Head

F: Sleeve

www.briggsplumbing.com

PAGE 1
Parts included in the Renewal Kit - KIT308C for three handle shower replacement Tools and Materials needed: Flat Head Screwdriver Phillips head screwdriver Pliers Plumber’s putty (tape) OLD SAYCO 308 NEW SAYCO 308C E SEAT REMOVAL TOOL INCLUDED INSTRUCTIONS Step 1: Remove all the parts from the box Step 2: Using a flat object pry loose the handle cap (A).
PAGE 2
SHOWER RENEWAL KITS ALL NEW DESIGNS SHOWER RENEWAL KITS TIRED OF YOUR CURRENT SHOWER?? Convert 308-2.0 to the ALL NEW 308C UPGRADE YOUR BATH FAUCET WITH CONTEMPORARY FAUCETS SEAT REMOVAL TOOL INCLUDED TWO AND THREE HANDLE KITS AVAILABLE: KIT308C for 308-2.0 or 308L-2.0 KIT208C for 208H-2.0 or 208HL-2.0 BRIGGS SERIES B300 AVAILABLE IN CHROME AND BRUSHED NICKEL UPGRADE YOUR SAYCO® SHOWER Complete Valves with Trim Kits Available www.briggsplumbing.