User guide

phone displays the asterisk * symbol for all digits
entered after the security number and the digits do not
appear in the Redial list display. Up to three security
numbers can be created using this option. Press the
Change softkey and then enter the security number.
8. Live Dialpad – Use this option to turn on or off
the dial pad mode. With live dialpad on, the telephone
automatically dials out and turns on handsfree as soon
as a dial pad key or softkey is pressed. With live dial-
pad off, you must dial the number first and then lift
the handset or press the / button. Press the
Change softkey to turn on or off the dial pad mode.
9. Set Audio – The Model 480 telephone allows you
to use a handset, headset or handsfree to handle
incoming and outgoing calls. This option provides dif-
ferent combinations of these three methods to provide
maximum flexibility in handling calls. There are four
options to choose from:
• Handsfree – This is the default setting. Calls can
be made or received using the handset or handsfree
speakerphone and can be switched between the two
modes.
• Headset – Choose this setting if you want to make
or receive all calls using a headset. (If this option is
chosen, the handsfree speakerphone will not function.
• Spkr/Hset – Calls will be sent to the handsfree
speakerphone. By pressing the / button on the
phone you can switch between the handsfree speak-
erphone and a headset.
• HSet/Spkr – Calls will be sent to the headset. By
pressing the / button on the phone you can
switch between the headset and the handsfree speak-
erphone.
Sayson 390/480 for Sphericall User Guide
25
Customizing Your Phone
2. Time / Date – Use this option to change the time
and date setting on the display. Press the appropriate
softkey to increase that item by one. For example, press
the Hour softkey to increase the hour from 1 to 2.
Note: The Sayson Phone sets the time and the date
when you receive your first call
3. Set ring tone – Press the Change softkey to
select one of four ring tones.
4. Clear Message Waiting – Sometimes the
Message Waiting prompt will appear and the
light will flash when there are no messages waiting on
your Voice Mail service. When in this option, select the
Clear softkey to clear the prompt and flashing light.
The light will flash again when there are new messages
waiting.
5. Area Code – In some locations, you cannot dial a
local number using the area code. By default, incoming
calls are recorded with area codes in the Callers List.
This option allows you to enter up to three local area
codes to be removed from incoming calls. Press the
Change softkey to enter an area code.
6. Contrast Level – Use the Change softkey to
cycle through eight contrast settings, which brighten or
darken the display
The next features are exclusive to the
model 480
7. Security Numbers – This option allows you to keep
selected numbers from appearing on the screen when
dialed. Use this option to protect passwords, access
codes, etc. When a security number is used, your tele-
Sayson 390/480 for Sphericall User Guide
24