OWNER’S MANUAL
TABLE OF CONTENTS Introduction............................................................................. 4 Post Setup / Fork Compatibility...................................... 6 Frame Features...................................................................... 7 Frame Geometry.................................................................... 8 Shock Setup............................................................................. 10 Optional Derailleur Guard Installation.......................
INTRODUCTION Congratulations on your purchase and welcome to the finest line of suspension bikes available! About Off Road, Stunt, Downhill and Freeriding This manual is designed to be used in conjunction with the Bicycle Owner’s Manual and owner’s manuals supplied by the manufacturer of the front and rear suspension components. If you did not receive any of these manuals, download them from the Internet, contact your dealer, or contact us by telephone.
INTRODUCTION Here is what you should look for when you inspect your bicycle for this type of riding: bent or broken components, such as the handlebar, handlebar stem, seatpost, pedals; dents, cracks, scratches, deformation, or discoloration. Because damage may be internal and hidden, if any of these signs are present, stop riding until your bicycle has been thoroughly inspected by your Specialized dealer.
Service and Modifications INTRODUCTION Technological advances have made bicycles and bicycle components more complex, and the pace of innovation is increasing. It is impossible for this manual or the accompanying manuals to provide all of the information required to properly repair and/or maintain your bicycle. In order to help minimize the chances of an injury, it is critical for you to have work performed by an authorized Specialized retailer.
FRAME FEATURES 1. Main Frame 2. Seatstay 3. Chainstay 4. Shock Link 5. Main Pivot 6. Dropout (Horst) Pivot 7. Shock Link at Seatstay Pivot 8. Shock Link at Frame Pivot 9. Upper Shock Eyelet 10. Lower Shock Eyelet 11. Shock 12.
ENDURO SL FRAME GEOMETRY 1 2 3 3 7 8 *Top Tube Length **Standover Hgt Head Tube Length Carbon Head Tube Length Alloy Wheelbase Chainstay Length Small 559mm (22.01“) 742mm (29.21”) 129mm (5.08”) 102mm (4.02”) 1060mm (41.73”) 424mm (16.70”) Medium 591mm (23.27”) 748mm (29.45”) 139mm (5.47”) 108mm (4.25”) 1097mm (43.19”) 424mm (16.70”) Large 620mm (24.41”) 762mm (30.00”) 153mm (6.02”) 128mm (5.04”) 1122mm (44.17”) 424mm (16.70”) X-Large 647mm (25.47”) 782mm (30.79”) 179mm (7.05”) 150mm (5.91”) 1151mm (45.
ENDURO SL FRAME GEOMETRY
1. Set sag: AFR SHOCK SETUP • See the attached air chart for starting pressure. Use a high-pressure shock pump to add air. • Push the rubber o-ring up to the seal, sit on the bike gently, dismount gently and measure the distance between the shock seal and the o-ring (sag). • Adjust air pressure until desired sag is reached. (This can be verified following the steps on p.6 or the measurements below the air chart). Air pressures may vary depending on rider style and/or terrain. 2.
1. Setting air pressure and sag: E150 FORK SETUP • Use a high-pressure shock pump to add air. Sag is based on a % of stroke of fork. Set sag according to chart as a starting point, then adjust for preference, terrain and riding technique. Always perform adjustments with fork in long travel mode! Pressure increases in short travel. • Fig.6: Install a zip-tie (not too tight) on one leg.
DERAILLEUR GUARD INSTALLATION The Specialized Derailleur guard is available separately through your local Specialized dealer. The guard works with solid or Q/R axle types and is compatible with all Mountain bike models using the 2005-2006 Enduro/Demo derailleur hanger. Guard Part #: 9896-4030 Hanger Part #: 9895-4021 31 25 10 Derailleur Guard Installation (Q/R option): 1. Install rear derailleur on derailleur hanger. 2. Place rear wheel in frame and install Q/R, with springs and without Q/R end nut. 3.
DOWNTUBE CABLE GUIDE INSTALLATION FRONT DERAILLEUR POSITION Place height adjustment nut in upper position for correct derailleur / chainring clearance The Specialized Enduro SL is equipped with bolt-on downtube cable guides. For proper housing placement and function, the hydraulic rear brake housing goes in the larger middle slot, the gear cables go on the outside. Correct derailleur position Do not overtighten the guide bolts.
ENDURO SL CARBON INSTRUCTIONS The Specialized Enduro SL Carbon frame utilizes advanced composite materials that require particular care during assembly, storage and riding. This installation and care guide contains instructions and warnings, plus torque specifications. Assembling a complete bicycle is a complicated task requiring training and experience, only a trained and experienced bicycle mechanic should install components to this frame.
WARNING! Do not extend the seat post beyond the minimum insertion line marked on the seat post, or the minimum seat post insertion required by the frame (see page 7). Extension beyond the minimum insertion line can result in failure, causing serious injury or death. Your Specialized frame does not require any Bottom Bracket or Head Tube pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the bottom bracket threads and head set cups.
1.k 2.m 2.o 2.n 2.k 1.h 1.k 1.c 1.g Link 1.k 1.d 1.g 1.c 1.k UPPER SHOCK ASSEMBLY Frame Mount 1.d 1.k Seatstay tabs 2.n 2.e 1.d 2.f Shock Schematic #18 1.h 2.f 1.d 1.k LINK ASSEMBLY 2.d 2.h Frame Mount Shock All alloy spacers: Small diameter of spacer facing bearing 2.g LOWER SHOCK ASSEMBLY Bolts 2.a 1.b Hanger bolt 2.c 1.a Derailleur Cage nut Hanger Chainstay Tab 1.f DROPOUT ASSEMBLY x 2 BB Shell Dropout 1.b Chainstay Bridge 1.a 2.
NOTE: Bearing and Bolt Kits are available only through your local Specialized dealer. To retain your warranty and for your safety, all maintenance should be performed by your local Specialized dealer. Bearing Kit Parts 2007 Enduro SL Part # Qty. Part Description 2 BB Pivot Bearing 1.a 4 Dropout Pivot Bearing 1.b 2 Shock Link @ Frame Pivot Bearing 1.c 4 Shock Link @ Seatstay Pivot Bearing 1.d 2 BB Pivot Spacer 1.e 6 Dropout Pivot Bearing Spacer 1.f 2 Shock Link @ Frame Pivot Spacer 1.
SBC LIMITED WARRANTY Specialized Bicycle Components, Inc.
USEFUL PRODUCT LIFE CYCLE Every Specialized bicycle and frameset has a useful product life cycle. The length of that useful product life cycle will vary with the construction and materials of the bicycle or frameset, the maintenance and care the bicycle or frameset receives over its useful product life cycle, and the type and amount of use the bicycle or frameset is subject to.
15130 Concord Circle Morgan Hill, CA 95037 www.specialized.