READ ME FIRST ® *DSL Equipment Installation Guide: Efficient Networks® 5260 *Digital Subscriber Line Part Number: 5260MC02 Version 1.2 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Table of Contents Follow Steps 1 through 8 to complete the DSL Equipment Installation Step 1: Verify Your System Requirements and Documents Step 2: Verify the Contents of Your DSL Equipment Kit Step 3: Install a Telephone Filter on Every Telephone Line Step 4: Choose Your Modem and Minimum Requirements Check Step 5: Installing the Ethernet Hardware Step 6: Install the Efficient Networks® DSL Modem Step 7: Finish Configuring your System Step 8: Follow Internet Service Provider Instructions APPENDICES Having
Step 1: Verify Your System Requirements and Documents This Installation Guide is for Macintosh® users only. The SBC Express installation software will ensure that you meet the following minimum requirements. You will not be able to complete the installation without meeting these requirements.
Step 2: Verify the Contents of Your DSL Equipment Kit Your DSL Equipment Kit Contains: A: This Installation Guide and the SBC Express Installation CD. B: 1 Efficient Networks® 5260 DSL Modem with Ethernet cable (connects to Adapter, below), and power cable. C: 1 Filter Pack containing: 5 in-line filters, 1 wall-mount filter, 1 two-way adapter, and 1 data cable.
Step 3: 3-1 Install a Telephone Filter on Every Telephone Line Set up the phone jack where your DSL modem will go. 1) Locate the phone jack where you want to connect your DSL 2) Insert the 2-way adapter in the phone jack 3) Connect a filter to one side of the 2-way adapter Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
4) If you have a phone, fax machine, analog modem or other phone device at this location, connect it to the filter 5) Connect the data cable that will go to your DSL modem to the unfiltered side of the 2-way adapter To the DSL modem Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
3-2 Install a filter on all other phones and phone devices. Why do I need a filter on all my other phones and phone devices? Converting your regular phone line into a high-speed Digital Subscriber Line (DSL) can cause audible noise (high pitched tones and static) when you talk on the phone. You need to install a filter on every telephone or device that shares the same phone number as your DSL line to eliminate this noise.
3-3 Other filters you may encounter in your DSL Equipment Kit. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Step 4: Choose Your Modem and Minimum Requirements Check 4-1 Insert the SBC Express CD into your CD-ROM drive. Double click the “SBC Express” icon to begin the installation process. 4-2 SBC Express displays the Welcome screen. Select the Efficient 5260 then click Next. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
4-3 SBC Express displays the Welcome screen. Click Start to proceed. 4-4 SBC Express displays the license agreement. If you agree to the terms, click Accept. If you do not accept, installation cannot continue. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
4-5 SBC Express quickly checks your computer system to ensure that it meets the minimum requirements for DSL service. Click Next to proceed if you meet all requirements. If your computer meets the minimum requirements, SBC Express automatically proceeds to the next step. You should continue to Step 6 on page 12. If you shutdown your computer, leave the CD in the CD-ROM drive, and SBC Express will continue after you restart.
Step 5: Installing the Ethernet hardware (if needed) IMPORTANT NOTE: Most Macintosh computers already have an Ethernet card installed. If this is the case with your Macintosh, SBC Express would have reported that you passed the minimum requirements. If you see the following screen, or if you ordered the NIC-less kit, it is not necessary to install the Ethernet Adapter provided in this equipment package. You may proceed directly to Step 6 on page 12 if you see the screen above.
Step 6: Install the Efficient Networks® DSL Modem Your computer should be turned on. Your modem should be turned OFF. You should be at the following screen in the SBC Express Installation Software: 6-1 Consult the following diagram to install your modem. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
6-2 Plug the power cable into the DSL modem and an electrical outlet. 6-3 Connect the data cable to your telephone jack and your DSL modem. There should NOT be a filter between the data cable and the wall jack. 6-4 Connect the Ethernet cable to the Ethernet Port or the built –in Ethernet Port on the back or side of your Macintosh and to the Ethernet Port on the back of your DSL modem. 6-5 Turn the DSL Modem power switch ON.
Step 7: Finish Configuring Your System 7-1 SBC Express now prompts you for your first and last name. Please type your first and last name and then click Next to proceed. 7-2 Enter your 10-digit phone number in the next screen. Click Next to proceed. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
7-3 Congratulations! You have finished setting up your DSL hardware. Click Quit in SBC Express and then proceed to Step 8. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Step 8: Follow the Instructions Supplied by your Internet Service Provider Your Internet Service Provider may have provided you additional instructions in this box or separately. These instructions may contain information about account setup, additional software installation, and/or Internet usage. Please follow those instructions to complete your Internet connection setup. Your Internet Service Provider will offer technical assistance if you need help connecting to the Internet.
Appendices Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh ©2001 SBC Advanced Solutions, Inc. All rights reserved.
APPENDIX A Having Trouble? If the suggestions below don’t resolve your problem, technical support is available from your Internet Service Provider. Please refer to the Internet Service Provider's information on how to contact them for technical assistance. I can’t open my computer case. What do I do? • Consult your computer manufacturer’s Owner’s Manual. • Call your computer manufacturer’s Support Line. I can’t connect.
APPENDIX B: Installing the Ethernet hardware (if needed—see Step 5) IMPORTANT NOTE: If your computer already has an Ethernet card installed and you passed the minimum requirements step in the SBC Express Installation Software, it is not necessary to install the Ethernet Adapter provided in this equipment package. If you have a newer Macintosh (iMac®, iBook®, and G4 Cube®) with a built in Ethernet port you do not need to install the provided Ethernet Adapter.
Installing the Ethernet Adapter • Follow steps B-1 through B-10 below for Desktop Macintosh installations. • For Laptops, skip to step B-11. DESKTOP Systems B-1 Click Quit in SBC Express and then turn off all peripheral devices. Remember to leave the SBC Express CD in the CD-ROM drive. B-2 Unplug the power cord for your computer from the electrical outlet. B-3 Open the case of your computer (review your computer manufacturer’s Owner’s Manual for specific instructions).
B-8 Verify that the end bracket is flush against the chassis. Make sure the gold connectors along the base of the Ethernet Adapter are completely and evenly inserted into the PCI slot. B-9 Fasten the card into the computer chassis with the screw you set aside earlier. B-10 Replace the computer cover. Plug the power cord back into the electrical outlet and turn on your Macintosh, making sure the SBC Express CD is in the CD-ROM drive. Proceed to step B-14.
LAPTOP Systems- Installing the Ethernet Adapter B-11 Click Quit in SBC Express and then turn off all peripheral devices. Remember to leave the SBC Express CD in the CD-ROM drive. B-12 Insert the Ethernet Card into your computer’s PCMCIA Type II or Type III slot. B-13 Carefully push the Media Access Module (MAM) into the socket on the Card until the locking tabs click into place. B-14 Power up your laptop after making sure the SBC Express CD is still in the CD-ROM drive.
Appendix C I want to uninstall/reinstall the Ethernet Adapter. What do I do? DESKTOP: For the Internal Ethernet Adapter Card: • Open the computer case using your computer manufacturer’s instructions and then remove the screw holding card in place. • Carefully remove the Ethernet Adapter card from the PCI slot. LAPTOP For the PCMCIA Card • Press the release button (consult your computer manufacturer’s Owner’s Manual if you don’t know where this button is located).
APPENDIX D Troubleshooting SBC Express Please refer to this list if you are having problems using SBC Express or if you receive an error message. If after troubleshooting, you are still having problems, then you should contact your Internet Service Provider 'help desk' for further information Step Problem Solution Minimum Resources SBC Express verifies minimum requirements on several resources including hard drive space, RAM, operating system level, and processor speed and family.