User manual

In most cases, the power switch will be found on the back of the device, usually on the

same face as the ports for the DSL line and network connection. Please refer to the

hardware documentation for more detail.

Step 3: Check the physical connection

It is not uncommon for the cables connecting your network to degrade

. For this reason, it

is a good idea to attempt to swap out the existing cables for spare or new ones. If you

have additional Ethernet

cables, or Y-splitters and filters (for those with line sharing

connections), please replace those currently in use with your spare set.

This picture

indicates the various connection points that you should check, if you have

an SDSL, IDSL, or second-line ADSL

circuit.

This picture

indicates the various connection points that you should check, if you have a

line-shared ADSL line.

SDSL, IDSL, or second-line ADSL home networking: