Installation guide

WAFER-945GSE 3.5” Motherboard
Page 112
BIOS Menu 7: Hardware Health Configuration
 CPU FAN Mode Setting [Full On Mode]
Use the CPU FAN Mode Setting option to configure the second fan.

Full On Mode D
EFAULT
Fan is on all the time

Automatic mode
Fan is off when the temperature is low
enough. Parameters must be set by the
user.

PWM Manual mode
Pulse width modulation set manually
When the CPU FAN Mode Setting option is in the Automatic Mode, the following
parameters can be set.
 CPU Temp. Limit of OFF
 CPU Temp. Limit of Start