User manual

KINO-QM770 Mini-ITX SBC
Page 89
5.3.5 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Mode Selection [AHCI]
Serial ATA Port0 Empty
Software Preserve Unknown
Hot Plug [Disabled]
Serial ATA Port1 Empty
Software Preserve Unknown
Hot Plug [Disabled]
Serial ATA Port2 Empty
Software Preserve Unknown
Hot Plug [Disabled]
Serial ATA Port3 Empty
Software Preserve Unknown
Hot Plug [Disabled]
Determines how SATA
controller(s) operate.
---------------------
 : Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 7: SATA Configuration
 SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.

IDE
Configures SATA devices as normal IDE device.

AHCI DEFAULT
Configures SATA devices as AHCI device.

RAID
Configures SATA devices as RAID device.
 Hot Plug [Disabled]
Use the Hot Plug option to enable or disable the hot plug function.

Disabled DEFAULT
Disables the hot plug function.

Enabled
Enables the hot plug function.