User manual

KINO-QM770 Mini-ITX SBC
Page 109
 Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On DEFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off
Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled DEFAULT
OEM Logo displayed instead of POST messages
 Fast Boot [Disabled]
Use the Fast Boot option to enable or disable boot with initialization of a minimal set of
devices required to launch active boot option. It has no effect for BBS boot options.

Disabled DEFAULT
Disable fast boot.

Enabled
Enable fast boot