User manual

KINO-QM770 Mini-ITX SBC
Page 16
3.1.2 Peripheral Interface Connectors
The table below shows a list of the peripheral interface connectors on the KINO-QM770.
Detailed descriptions of these connectors can be found below.
Connector Type Label
Audio connector 10-pin header FRONT-PANEL1
Battery connector 2-pin wafer BAT1
Digital I/O connector 10-pin header DIO1
EC debug port 18-pin header CN4
Fan connector (CPU) 4-pin wafer CPU_FAN1
Fan connector (system) 3-pin wafer SYS_FAN1
Front panel connector 10-pin header F_PANEL1
Infrared connector 5-pin header IR1
Keyboard/mouse connector 6-pin wafer KB_MS1
LVDS connector 30-pin crimp LVDS1
LVDS backlight connector 5-pin wafer INVERTER1
PCIe Mini card slot PCIe Mini card slot CN5
PCIe x16 slot PCIe x16 slot CONN1
Power button (on-board) Push button PWR_SW1
Power connector (12V) 4-pin connector PWR2
RS-232 serial ports (COM2) 10-pin header COM2
RS-422/485 serial port (COM3) 4-pin wafer COM3
SATA 6Gb/s connectors SATA connector S_ATA1, S_ATA2
SATA 3Gb/s connectors SATA connector S_ATA3, S_ATA4
SATA power connectors 2-pin wafer CN1, CN2
SMBus connector 4-pin wafer CN3
SO-DIMM connectors SO-DIMM connector DIMM1, DIMM2
SPDIF connector 5-pin header SPDIF1