User manual

KINO-QM770 Mini-ITX SBC
Page 65
4.6.3 Clear ME RTC Registers
Jumper Label: ME_RTC1
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-4
Jumper Loc
ation:
See Figure 4-10
Re
sets the RTC registers used for the Intel® Management Engine when the on-board
battery is changed.
Pin Description
Short 1-2 Save ME RTC registers (Default)
Short 2-3 Clear ME RTC registers
Table 4-4: Clear ME RTC Registers Jumper Settings
Figure 4-10: Clear ME RTC Registers Jumper Location
4.6.4 Display Mode Selection
Jumper Label: JP1
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-5