User manual

KINO-QM770 Mini-ITX SBC
Page 66
Jumper Location:
See Figure 4-11
Sets the external DVI-I
connector as an analog CRT connector or a DVI connector.
Pin Description
Open DVI (Default)
Short 1-2 CRT
Table 4-5: Display Mode Selection Jumper Settings
Figure 4-11: Display Mode Selection Jumper Location
4.6.5 Flash Descriptor Security Override
Jumper Label: J_FLASH1
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-6
Jumper Loc
ation:
See Figure 4-12
The Fla
sh Descriptor Security Override jumper specifies whether to override the flash
descriptor.