Quick Installation Guide

ManualsBrandsSBO Hearing ManualsElectronicsHearing Aid Module

Table Of Contents

Oticon Radio Model - Regulatory Label Information for USA & Canada
- This device complies with Part 15 of the FCC Rules and with RSS-210 and RSS-247 of Industry Canada.
  - Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

SBO Radio Model - Quick Installation Guide

Radio Model Name: SBO BTE UP

SBO Hearing A/S

Main +45 39 17 71 00

Kongebakken 9

Fax +45 39 27 79 00

DK-2765 Smørum

Denmark

www.sbohearing.com

Below the main flex PCB of the SBO BTE UP radio model with the most important electrical and electro-mechanical components can be seen:

The most important part of the radio model is the Engine Module mounted on the main flex PCB, which connects it to both the EEPROM memory and all external

connections: On the top side these are the microphones, the battery terminals and the push button. The telecoil is also used for wireless battery charging.

The SBO BTE UP radio model requires only a single cell rechargeable battery and an external speaker (also incl. the wire antenna for the Bluetooth radio

part) to be attached and plastic shells, defining the industrial design of a hearing aid end product and holding everything together, in order to be operational.

SBO BTE UP Radio Model – Main PCB – Top side