User's Manual

46 47
Cleaning and maintenance
FittingLINK is a sealed device that requires minimum maintenance.
To ensure high levels of hygiene always disinfect FittingLINK
before a programming session begins.
To disinfect, wipe FittingLINK and the neck loop with a 70%
alcohol / 30% water solution. FittingLINK and the neck loop must
never be washed or immersed in water or other liquids.
The power supply, the charging cradle and the Bluetooth adaptor must be kept free of
dirt or debris. These parts are to be cleaned with a soft, dry cloth only.
When FittingLINK is not in use, turn it OFF and store it in the charging cradle in order for
it to be sufficiently charged and ready for the next fitting session.
Technical information FittingLINK
FittingLINK contains a radio transmitter using short-range magnetic induction
technology, working at 3.84 MHz and a Bluetooth radio operating at 2.4 GHz.
The magnetic field strength of the transmitter at 3.84 MHz is
< -15 dBμA/m @10m (measured in 10 kHz bandwidth) and the
radiated power of the Bluetooth radio is < +8 dBm EIRP.
The emission power from FittingLINK is below international emission limits for
human exposure. FittingLINK complies with international
standards concerning electromagnetic compatibility.
Due to the limited size available on the device, many of the relevant approval markings
are found in this document.
This device is certified under:
FCC ID: 2ACAHWLP021
IC: 11936A-WLP021