User's Manual

10 11
You should familiarize yourself with the following general warnings and the entire
contents of this booklet before using your FittingLINK.
Products to be connected to external equipment
When using the USB cable always insert the cable into FittingLINK before connecting
the cable to other equipment.
The safety of recharging batteries with the USB cable is determined
by the external equipment. When the USB cable is connected to
mains-operated equipment, this equipment must comply with IEC
60065, IEC 60950-1, IEC 60601-1 or equivalent safety standards.
For safety reasons, only recharge the battery with original FittingLINK accessories.
If third party equipment is used, safety cannot be guaranteed.
Warnings
Explosives and heat exposure
There is a risk that the battery will explode and cause serious injury if FittingLINK is
exposed to excessive heat. Never expose FittingLINK to extreme heat by putting it
in the oven, microwave, burning it or leaving it inside a parked car in the sun.
The operating temperature for FittingLINK is between 5 and 40 °C.
Choking hazards
FittingLINK is not a toy and therefore should be kept out of the reach of children and
anyone else who might swallow parts or otherwise cause injury to themselves.
If a part is swallowed, see a doctor immediately.
Interference and active implants
FittingLINK is designed to comply with the most stringent Standards of International
Electromagnetic Compatibility. However, FittingLINK might cause interference with
other medical devices, such as defibrillators and pacemakers.
Warnings