User guide

5 Setup
5.3 System Settings
AT-101
Page 42
Art.-no.: 2.510526 Rev.: c
5.3.2 Communication
If in doubt about any of these settings, please contact your phone company and/or
modem supplier.
« Press softkey COMM
Parameter Options Description
Baudrate
9600
14400
19200
28800
38400
57600
115200
Select a Baud rate according to the modem/computer used. Most compu-
ters can connect at 115200 Baud and the standard modem speed is 57600
Baud. If problems are experienced during transmission reduce the Baud
rate.
Mode
Line
Modem
• line (computer connected directly to the RS-232 interface)
• modem (for transmission over the phone network)
Phone No.
T, 0417608787
P, 0417608787
Enter the telephone number preceded by ‘T‘ or ‘P‘ (tone or pulse).
A comma ‘,‘ gives a one second pause in dialling - this may be necessary
for example, if an outside line is required.
Modem Init.
ATB0L1V0Q0E0S0=0
Enter the modem initialisation codes. Full details will be found in the user
guide for your modem. However, the modem initialisation must contain at
the minimum, the following commands with the prefix ‘AT‘.
• ‘Q0‘- modem sends response
• ‘V0‘- numerical response codes
• ‘VE0‘- no command echo
The standard modem initialisation code is: ATB0L1V0Q0E0S0=0
TEST
AND INFO
EXITCOMMUNIT