User Manual

Fast Skin film application: installation
Use the spatula to firmly glue
the film to the device.
Always move the spatula outwards, helping the
air escape from beneath the film.
Gently, but firmly, press with spatula the sides of
the film so that the edges adhere well.
If you notice any bubbles, apply additional
pressure on top of the bubbles with the spatula
and move it outwards so that additional surface
tension makes the air escape immediately or
gradually drain in a few hours.
Always move the spatula in one direction at a
time, avoid back-and-forth movements.
12
FAST SKIN - OPERATION MAN UAL
39