Operator`s manual
9
R
Section 3
SPECIFICATIONS
ENGINE3.1
General Type ................................................................................................Heavy Duty Industrial/Commercial Gasoline
Brand ..................................................................................................................................................................Kawasaki
Horsepower:
(Scag Model SVR61V-29FX) ....................................................................................29 HP (Engine Model # FX801V)
Cylinders ..................................................................................................................................... 2 with Cast-Iron Sleeves
Governor ................................................Mechanical Type with Variable Speed Control Set At 3600 RPM (+/- 100 RPM)
Idle Speed:
Kawasaki ............................................................................................................................. 1550 RPM (+/- 150 RPM)
Fuel ...................................................................................... Non-Leaded Gasoline with a Minimum Octane Rating of 87
Oil Pump ...............................................................................................varies - see engine manufacturer's speciļ¬cations
Starter:
Kawasaki .................................................................................................... Electric Starting with solenoid shift starter
ELECTRICAL3.2
Starter ..................................................................12-Volt Electric Ring Gear Type, Key and Solenoid Operated Interlock
Interlock Switches ............................................................Operator Presence, Mower Engagement (BBC), Neutral Lever
Instrument Panel ..........................Key Switch, Throttle Lever, Choke Lever, PTO Switch, Hour Meter and Neutral Lever
ENGINE DECK3.3
Drive System ............................................................................. Hydraulic Drive with Two Variable Displacement Pumps
and Two Cast-Iron High Torque Wheel Motors
Hydraulic Pumps ..............................................................Two Hydro-Gear model PK Series 12 cc. Hydraulic Pumps
with Dump Valves for movement without the engine running
Hydraulic Drive Motors ........................................................................ Two Parker Model TE Cast-Iron Wheel Motors
Steering/Travel Control ..............................................Twin Lever Steering Control with Individual Control to Each Wheel
Parking Brake ...........................................................................Lever Actuated Linkage to Brakes on Both Drive Wheels
Wheels:
(2) Front Caster ........................................................................................... 13 x 6.50 - 6 Flat-Free w/Roller Bearings
(2) Drive - ............................................................................. 20 x 10 - 8 Four-Ply Pneumatic Tubeless, Radius Edge
Tire Pressure:
Front Caster....................................................................................................................................................Flat-Free
Drive .................................................................................................................................................................. 12 PSI
Fuel Tank .............................................................................. 8 Gallon Seamless Polyethylene Tank with Large Opening,
Fuel Cap, Fuel Gauge and Integrated Cup Holder
Travel Speed:
Forward ............................................................................................................................................... 0 up to 11 MPH
Reverse .............................................................................................................................................. 0 up to 6.0 MPH
-NOTE- The machine will travel at 11 mph for transport purposes. For best cutting performance the forward travel
speed should be adjusted depending upon the cutting conditions.