Operator`s manual

24
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS7.1
HOURS
PROCEDURE COMMENTS
BREAK-IN
(FIRST 10)
8 20 40 100 200 400
X
Check all hardware for tightness
X
C h e c k a l l b e l t s fo r p r o p e r
alignment
See paragraph 7.6
X
Check all hydraulic fittings and
hoses for leaks
See paragraph 2.5
X
Check engine oil level See paragraph 7.3
X
*Clean mower
X
Check tire pressure See paragraph 7.8
X
*Clean air filter element See paragraph 7.5
X
Check condition of blades See paragraph 7.7
X
Sharpen cutter blades See paragraph 7.7
X
Check tire pressure See paragraph 7.10
X
Check the operator inter lock
system
See paragraph 4.2
X
Change engine oil and filter See paragraph 7.3
X
Check belts for proper alignment See paragraph 7.6
X
Check condition of fuel lines
X
C h e c k a l l b e l t s fo r p r o p e r
alignment
X
*Replace engine air filter S e e e n g i n e ope rat o r ' s
manual
X
Grease caster wheel bearings See paragraph 7.2
X
Drain hydraulic system, replace
hydraulic oil and filters
Use SAE 20W50 Motor Oil.
See paragraph 7.2
X
Check all hardware for tightness
X
Change engine oil See paragraph 7.4
X
*Clean air cleaner element See paragraph 7.5
MAINTENANCE