Specifications

Installing the OfficeScan Client
3-41
To run a vulnerability scan on computers requesting IP addresses from a DHCP
server:
1. Configure DHCP settings in the TMVS.ini file found under the following folder:
<Server installation folder>\PCCSRV\Admin\Utility\TMVS.
2. Navigate to
<Server installation folder>\PCCSRV\Admin\Utility\TMVS and
double-click TMVS.exe. The Trend Micro Vulnerability Scanner console appears.
3. In the Results table, click the DHCP Scan tab.
Note: The DHCP Scan tab is not available on computers running Windows 2008.
T
ABLE 3-19. DHCP settings in the TMVS.ini file
SETTING DESCRIPTION
DhcpThreadNum=x Specify the thread number for DHCP mode. The
minimum is 3, maximum is 100. The default value is
3.
DhcpDelayScan=x This is the delay time in seconds before checking
the requesting computer for installed antivirus soft-
ware.
The minimum is 0 (do not wait), maximum is 600.
The default value is 60.
LogReport=x 0 disables logging, 1 enables logging.
Vulnerability Scanner sends the results of the scan
to the OfficeScan server and the logs display in the
System Event Logs screen of the Web console.
OsceServer=x This is the OfficeScan server's IP address or DNS
name.
OsceServerPort=x This is the Web server port on the OfficeScan
server.