Specifications

Trend Micro™ OfficeScan™ 10 Administrator’s Guide
5-18
To obtain the Smart Scan Server address:
• For the integrated Smart Scan Server, open the OfficeScan Web console and go
to Smart Scan > Integrated Server.
• For the standalone Smart Scan Server, open the standalone server's console and
go to the Summary page.
Tip: Because the integrated Smart Scan Server and the OfficeScan server run on the
same computer, the computer’s performance may reduce significantly during
peak traffic for the two servers. To reduce the traffic directed to the OfficeScan
server computer, assign a standalone Smart Scan Server as the primary scan
source and the integrated server as a backup source.
4. Click Test Connection to verify if connection to the server can be established.
Click Save when the test connection is successful.
5. To open the console of a local Smart Scan Server, click Launch console.
• For the integrated Smart Scan Server, the server’s configuration screen displays.
• For standalone Smart Scan Servers and the integrated Smart Scan Server of
another OfficeScan server, the console logon screen displays.
6. To delete an entry, click the icon under Delete.
7. Select whether clients will refer to the servers in the order in which they appear on
the list or randomly. If you select Order, use the arrows under the Order column to
move servers up and down the list.
8. Click Save.
9. Back in the Smart Scan Source screen, select whether to refer to the standard list if
the client is unable to connect to any server on the custom list.
10. To modify an IP address range and its corresponding custom list, click the link
under IP Range.
11. To export the custom lists to a .dat file, click Export and then click Save.
12. If you have exported custom lists from another server and want to import them to
this screen, click Import and locate the .dat file. The lists load on the screen.