Specifications

Managing the OfficeScan Server
8-13
4. If you will use a proxy server to connect to the Control Manager server, specify the
following proxy settings:
• Proxy protocol
•Server FQDN or IP address and port
• Proxy server authentication user ID and password
5. Decide whether to use one-way communication or two-way communication port
forwarding, and then specify the IP address and port.
6. To check whether OfficeScan can connect to the Control Manager server based on
the settings you specified, click Test Connection. Click Register if connection was
successfully established.
7. If you change any of the settings on this screen after registration, click Update
Settings after changing the settings to notify the Control Manager server of the
changes.
8. If you no longer want the Control Manager server to manage OfficeScan, click
Unregister.
To check the OfficeScan status on the Control Manager management console:
1. Open the Control Manager management console.
To open the Control Manager console, on any computer on the network, open a
Web browser and type the following:
For Control Manager 3.5:
https://<Control Manager server name>/ControlManager
For Control Manager 5.0:
https://<Control Manager server name>/Webapp/login.aspx
Where <Control Manager server name> is the IP address or host name of the
Control Manager server
2. In Main Menu, click Products.
3. Select Managed Products from the list.
4. Check if the OfficeScan server icon displays.