Technical data

ASSEMBLY

Connecting piece top outlet

Your wood-burning stove has been prepared for a top outlet by the

manufacturer. Remove the cover plate from the top plate, and fit the

connecting piece, the enclosed seal, and the fittings from the service

package. At the same time, fix the safety fitting crosswise to prevent

damage to the baffle plate when sweeping the chimney.

Connecting

piece

Safety

fitting

Bracket

Seal for

connecting

piece

Screws for

adjusting

the height

of the top

plate

Screws for adju-

sting the height

of the frame for

the top plate

The Scan 58 with "see through" plinth

External combustion air can be connected underneath the combu-

stion chamber using the connection piece supplied and connecting

outdoor air.

If you decide on connecting external combustion air through the

bottom of the plinth, unscrew the blanking plate and fit it under the

combustion chamber. Then fit the connection piece supplied under

the plinth as shown below before connecting outdoor air.

Scan 58-7 and Scan 58-8

External combustion air can be connected in the magazine under the

combustion chamber by fitting the connection piece and fresh air

box supplied. Outdoor air can then be connected through the bottom

or rear of the stove.

Scan 58 Wall-hung model