User guide
Table Of Contents
- Printer Overview
- Networking Your Printer
- Connecting to a wireless network
- Adding a wireless network connection to a USB-connected computer
- Online Printer Management Tool
- Handling Paper
- Printing
- Mobile Printing
- Copying
- Scanning
- Faxing
- Maintaining Your Printer
- Troubleshooting
- Product and Safety Specifications
- Features and Specifications
- Print performance
- Photo printing features
- Copy document features
- Copy photo features
- Scanning features
- Faxing features and specifications
- Input paper tray
- Output paper tray
- Automatic Document Feeder (ADF) for originals
- Ink cartridges
- Connectivity
- Software support
- Physical specifications
- Warranty
- Minimum System requirements
- Safety information
- Regulatory compliance
- ENERGY STAR® Qualified
- Warranty Information
- Declaration of Conformity
- Features and Specifications
Printing
48 www.kodak.com/go/aiosupport
Using default settings to print a picture
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see Save as Defaults,
page 50.)
To print a picture from a memory card or USB-connected device (ESP Office 2170
printer only) using the default settings:
1. Load photo paper (see Loading photo paper, page 39).
2. Insert the memory card into the memory card slot, or connect a digital camera
or USB flash drive to the front USB port.
IMPORTANT: Do not use the memory card slot and the USB port at the same time.
3. Press or to select the picture you want to print.
4. Press Start Black to print a black-and-white picture, or Start Color to print a
color picture.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive,
do not remove it from the printer while printing.
memory card slot
front USB port
(ESP Office 2170
printer only)