Technical data

ASSEMBLY12
Fit the gasket provided to the flue connection piece.
Gasket
Fit the flue connection piece in the flue outlet with 5 x Allen screws.
If necessary, use the supplied Allen key from the service kit for tighte-
ning.
H
Pin for smoke deflector
plate Ø6 x 50
g
Fitting the flue connection piece
The flue connection piece and the gasket for this is provided loose in
the insert’s combustion chamber. Before fitting the flue connection
piece, the smoke deflector plate must be removed. This must be done
as follows:
Lift the smoke deflector plate and remove the pins.
Lower and remove the smoke deflector plate.
5 x Allen screws M6x10
H
I
I