Technical data

3
Installation
The house owner is responsible for ensuring that all necessary natio-
nal and local safety measures are observed during installation and
fitting and also responsible for observing the fitting and operating
instructions detailed in this manual.
When you install any kind of fireplace or stove, you must inform the
local authorities. You are also responsible for calling in a chimney
sweep to inspect and authorize the installation.
To ensure best-possible functionality and safety for your installation,
we advise you to call a professional fitter. Our Scan Dealer will be
able to recommend a qualified fitter in your area. For information on
Scan Dealers, please go to www.scan.dk.
Technical data and dimensions
Test in compliance with EN 13229
CO Emission at 13% O
2
: 0,16% 1654 mg/Nm
3
Dust @ 13% O
2
: 66 mg/Nm
3
Efficiency: 70%
Rated heat load: 10 kW
Chimney temperature: 371 °C
Flue outlet flow: 10,1 g/sek
Vacuum EN 13229: 12 Pa
Recommended vacuum in flue connection piece: 16-20 Pa
Combustion air requirement: 22,8 Nm
3
/h
Fuel: Wood
Fuel consumption: 3 Kg/h
Amount of fuel: 2,5 kg
Weight: 100 kg
Flue connection piece internal diameter: 175 mm
Flue connection piece external diameter: 179 mm
Approval type: Intermittent fuelling
Intermittent fuelling means normal use of a woodstove. In other
words, you should let the fire die down until only the embers are left,
before refuelling.
The Scan DSA 11 was build in compliance with the homologized pro-
duct type specified in the Assembly- and Instructions Manual provi-
ded with the product.
The EC declaration of conformity is available from www.scan.dk
TECHNICAL DATA