User Manual

WARNING: Keep clear of obstruction all ventilation openings in the appliance enclosure.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacture.
WARNING: Do not use electrical appliance inside the food storage compartments of the
appliance.
If the supply cord becomes damaged, it must be replaced by an authorized service agent,
or similarly qualified person, in order to avoid a hazard.
Appliance is designed to be working according to class 4 (ISO climatic classification),
wherever the ambient temperature not exceed 30 °C and relative humidity not exceed
55%.
Installation
• Remove the wooden pallet and the packing. External surfaces are supplied with a
protection foil, which must be removed before installation.
• If the cabinet has been transported, please wait 2 hours before starting up.
• The cabinet operates on 220-240V/50 Hz. The main electrical connections must be
done by skilled electricians.
• This product must be continuously electrified for 3 ~ 4 hours, when inner temperature
is stable, it can store items in batches, to store too many items at once is strictly
forbidden, leave some space between items to facilitate air flow inside cabinet, in case
that goods are not frozen adequately.
• The cabinet must be responsible by special person, check operation condition daily, to
make sure safe use.
• When moving the cabinet, tilt angle between bottom of cabinet and floor should not
be more than 45 °.
• When moving the cabinet, lift from the bottom, move it slightly and carefully.
• During transportation and handling, do not invert the cabinet, lie it down, roll, or
squash. Do not step on it and crash.
• Keep the door, light box and front grill free from force, to avoid these parts to be
damaged.
• Do not expose it to direct sunlight, otherwise, the cabinet may not be cold enough.
• Place the cabinet in a dry and ventilated place.
• Keep the cabinet away from strongly heat-emitting sources.
• This cabinet should not be placed in flammable or corrosive gases in case of an
explosion or electric shock.
• This cabinet should not be placed in the environment with high humidity or splash, in
case of electricity leakage.
• Thermostat has been set at factory. If you need to reset, please operate carefully.
• The cabinet defrosts automatically. Defrosted water runs to a container placed in the
compressor compartment and evaporates.Please do notpress the button to avoid
disorder of defrost function.