User Manual

Caution
Disposal of the cabinet must take place in an environmentally correct way. Please note
existing regulation on disposal. There may be special requirements and conditions which
must be observed.
Troubleshooting
Freezer does not operate
• Power socket has no electricity, fuse blown.
• Power socket has power, but the plug is not inserted.
• Temperature control is set too high for temperature.
• Voltage is too low.
• Plug loose.
• Power switch has not been switched on.
Temperature appears warm
• Door does not seal well.
• Door is opened for a long time.
• Temperature is set too high.
• Cabinet is in direct sunlight or near a hot object.
• Overloading
No off for compressor
• Temperature is set too low.
• Put too many items at once.
• Cabinet is put too close to the wall, ambient temperature is high.
• Cabinet is in direct sunlight or near a hot object
• Ambient temperature is too high.
Big noise
• Floor is uneven.
• Cabinet is not put stably.
• Cabinet is in touch with the wall or other objects.
Caution
In case of failure, please check and troubleshoot according to the instructions.
If you cannot locate the reason to failure, please contact your supplier. Please inform
model and serial number of the cabinet. You can find this information on the rating label