Owner`s manual

05 Programming ORCHESTRAL mode
• Press EDIT
• Select 14 to choose BELLOWS LAYER: playing softly on the right, only the sound
of Treble 1 will be heard; pulling hard on the bellows the sound on Treble 2 will
also be heard
• Select 15 to choose BELLOWS CHANGE: playing softly on the right, only the
sound of Treble 1 will be heard; pulling hard on the bellows only the sound on
Treble 2 will be heard
• Select 16 to choose LAYER; both the sound on Treble 1 and the sound on
Treble 2 will be heard with their respective volumes
• Press EDIT again to exit
(NB: this parameter can be stored in a combination)
06 Programming the KEY VELOCITY
• Press EDIT
• Select 24 so that every note ON plays with a key velocity value of 64
• Select 25 so that every note ON plays with a key velocity value of 100
• Press EDIT again to exit
(NB: this parameter can be stored in a combination)
07 Programming the BELLOWS RESPONSE
• Press EDIT
• Select 30 to play with soft bellows: a small movement of the bellows will
produce a notable variation in volume.
• Select 31 to play with medium bellows: a greater movement of the bellows
is needed to produce a notable variation in volume.
• Select 32 to play with hard bellows: a large movement of the bellows is
needed to produce a notable variation in volume.
• Press EDIT again to exit
(NB: this parameter can be stored in a combination)
08 To copy a COMBINATION to another location
• Press the COMBI button and select the combination you wish to duplicate
• Press EDIT
• Select 33
• Press EDIT again
• Select the number of the location where you want the Combination
duplicated
• Press EDIT again to exit and store the setting
09 Programming the SWELL PEDAL
• Press EDIT
• Select 20 – the swell pedal will control the overall volume
• Select 21 – the swell pedal will control the volume of the treble section
• Select 22 – the swell pedal will control the pitch bend UP of Treble 1
• Select 23 – the swell pedal will control the pitch bend DOWN of Treble 1
• Press EDIT again to exit and store the setting
(NB: this parameter can be stored in a combination)