Owner`s manual

13 Activating/deactivating the CHIN REGISTERS
• Press EDIT
• Select 26 to activate the chin registers (the default effects are:
chin register 1 - modulation: chin register 2 - note C1 on midi channel 16)
• Select 27 to deactivate the chin registers
• Press EDIT again to exit and store the setting
14 Programming the functions of CHIN REGISTER 1
• Press EDIT
• Select 80 – the CHIN REGISTER will control the Modulation of Treble 1
• Select 81 – the CHIN REGISTER will control the overall Sustain (HOLD)
• Select 82 – the CHIN REGISTER will control the Sustain (HOLD) of Treble 1
and Treble 2
• Select 84 – the CHIN REGISTER will control the Glide UP of Treble 1
• Select 85 – the CHIN REGISTER will control the Glide DOWN of Treble 1
• Select 86 – to assign note C1 of midi channel 16 to chin register 1
• Select 87 – press edit again, select the number of the desired sound to
assign to parameter 86
• Select 88 – the CHIN REGISTER will scroll UP through the Combinations one
at a time
• Select 89 – the CHIN REGISTER will scroll DOWN through the Combinations
one at a time
• Press EDIT again to exit and store the setting
NB: if you wish to use chin register 1 to scroll UP or DOWN through a sequence
of combinations, you must first store parameter 88 or 89 in each of those
combinations
15 Programming the functions of CHIN REGISTER 2
• Press EDIT
• Select 95 – the CHIN REGISTER will control the Modulation of Treble 1
• Select 96 – the CHIN REGISTER will control the overall Sustain (HOLD)
• Select 97 – the CHIN REGISTER will control the Sustain (HOLD) of Treble 1
and Treble 2
• Select 99 – the CHIN REGISTER will control the Glide UP of Treble 1
• Select 100 – the CHIN REGISTER will control the Glide DOWN of Treble 1
• Select 101 – to assign note C1 of midi channel 16 to chin register 2
• Select 102 – press edit again, select the number of the desired sound to
assign to parameter 101
• Select 103 – the CHIN REGISTER will scroll UP through the Combinations
one at a time
• Select 104 – the CHIN REGISTER will scroll DOWN through the Combinations
one at a time
• Press EDIT again to exit and store the setting
NB: if you wish to use chin register 2 to scroll UP or DOWN through a sequence
of combinations, you must first store parameter 103 or 104 in each of those
combinations