Owner`s manual

16 MIDI DUMP
Using the special supplied cable connected to an external sequencer, for example
a computer with suitable software; it is possible to save combinations in the form of
an exclusive system code. This can serve as a back-up in case of loss or as a file to
load onto another EWA.
NB: Many sequencers have MIDI THRU active – this will interfere with MIDI OUT. To
avoid problems when reloading combinations into the EWA unplug the midi cable
from the MIDI OUT SOCKET of the EWA.
Saving the COMBINATIONS in Bank 1
• Press EDIT
• Start the record function of the attached midi sequencer
• Select 112
• Press EDIT again: the EWA will transmit a sequence containing all the
COMBINATIONS numbered from 1 to 32.
The display will switch off during the process and come on again when it is finished
(This procedure will take a few seconds.)
Stop the record function of the attached midi sequencer and save the information
Saving the COMBINATIONS in Bank 2
• Press EDIT
• Start the record function of the attached midi sequencer
• Select 113
• Press EDIT again: the EWA will transmit a sequence containing all the
COMBINATIONS numbered from 33 to 64.
The display will switch off during the process and come on again when it is finished
(This procedure will take a few seconds.)
Stop the record function of the attached midi sequencer and save the information
Saving the COMBINATIONS in Bank 3
• Press EDIT
• Start the record function of the attached midi sequencer
• Select 114
• Press EDIT again: the EWA will transmit a sequence containing all the
COMBINATIONS numbered from 65 to 96.
The display will switch off during the process and come on again when it is finished
(This procedure will take a few seconds.)
Stop the record function of the attached midi sequencer and save the information
Saving the COMBINATIONS in Bank 4
• Press EDIT
• Start the record function of the attached midi sequencer
• Select 115
• Press EDIT again: the EWA will transmit a sequence containing all the
COMBINATIONS numbered from 97 to 128.
The display will switch off during the process and come on again when it is finished
(This procedure will take a few seconds.)
Stop the record function of the attached midi sequencer and save the information