Owner`s manual

• Using the Sections button, select the part of the accordion that you wish to

alter: Treble 1, Treble2, Chords or Bass.

• Press repeatedly the Volume+ or Volume- buttons and you will see the column

of LEDs in the volume section light up or switch off and volume level will briefly

be shown in the display. If you press these buttons at the same time the volume

decreases to zero (mute). Press “+” to increase it again. To alter the overall

volume, push COMBI and then the VOLUME + or VOLUME - buttons

• Using the Sections button, select the part of the accordion that you wish to

alter: Treble 1, Treble2, Chords or Bass.

• Press the Oct.Trsp. button until you reach the desired pitch: when the “Up” led

is lit, the section will play an octave higher; when the “Down“led is lit an octave

lower and when neither led is alight then the section is at normal pitch.

PLEASE NOTE: this function is not available in COMBI mode.

• Press the COMBI button

• Press the Oct.Trsp. button. The display will show “t 0”

• Press any key on the right hand keyboard: all the sections of the EWA will be

transposed in the key of the chosen note. Example: pushing D (2 semitones

CHANGING THE

VOLUME

MUTING

THE SECTIONS

CHANGING THE

OCTAVE (PITCH) OF THE SECTIONS

TRANSPOSE IN ALL KEYS