Owner`s manual

above C) the instrument will be tuned a tone higher: the display will show “t 2”:
pushing A (3 semitones below C) the instrument will be tuned a tone and a half
lower: the display will show “t - 3”These values will be indicated momentarily in
the display. To return to the original situation, press the Oct.Trsp. button and
then note C
• When the accordion is switched off the transposition is NOT memorized.
Pressing the Bellows button you can decide to have the expression activated on
the left hand only, the right hand only, both sides together or off completely.
When the EWA is switched on the bellows are always active on both sides.
By pressing the Midi Out button; you can decide to listen to sounds from the internal
sound card or an external expander or both together. On power up the EWA is
ready to play the internal sounds only. To play from an external source, remember
to attach a midi cable from the Midi-Out socket of the EWA to the Midi-In socket of
your expander and then select “Ext” or “Int+Ext”. The EWA transmits: note change,
program change and bellows expression. For characteristics and other functions of
your expander, refer to the manual of that instrument.
EWA can store up to 128 COMBINATIONS of which 32 are pre programmed in our
factory (but these can be altered, deleted and even then recalled). Using
COMBINATIONS is the best way of preparing presets which can be made up of
different sounds from each section each with its own volume. They can then be
recalled easily whilst playing by choosing the appropriate number.
ACTIVATING THE
BELLOWS EXPRESSION
INTERNAL
SOUNDS AND MIDI OUT (EXTERNAL EXPANDER)
COMBINATIONS