Owner`s manual

02 Programming the MIDI channels

Each section can be assigned a specific midi channel by the user

To assign a midi channel for TREBLE 1 (the default channel is 01)

Press EDIT

Press 1 – the display will start flashing

Press EDIT again

Select the required channel number (from 1 to 16)

Press EDIT again to exit and store the setting

To assign a midi channel for TREBLE 2 (the default channel is 04)

Press EDIT

Press 2 – the display will start flashing

Press EDIT again

Select the required channel number (from 1 to 16)

Press EDIT again to exit and store the setting

To assign a midi channel for CHORDS (the default channel is 02)

Press EDIT

Press 3 – the display will start flashing

Press EDIT again

Select the required channel number (from 1 to 16)

Press EDIT again to exit and store the setting

To assign a midi channel for BASS (the default channel is 03)

Press EDIT

Press 4 – the display will start flashing

Press EDIT again

Select the required channel number (from 1 to 16)

Press EDIT again to exit and store the setting

03 Programming REVERBERATION/ECHO

Press EDIT

Select 5 for Short Reverb

Select 6 for Medium Reverb

Select 7 for Hall Reverb

Select 8 for Church Reverb

Select 9 for Echo

Select 10 to turn off Reverb

Press EDIT again to exit

(NB: this parameter can be stored in a combination)

04 Selecting POLIPHONIC or MONOPHONIC mode for Treble 1

Press EDIT

Select 11 to play Treble 1 sounds in polyphonic mode

Select 12 to play Treble 1 sounds in monophonic mode

Select 13 to play Treble 1 sounds in polyphonic mode with a portamento effect

Press EDIT again to exit

(NB: this parameter can be stored in a combination)