SD 46 SD 76 SD 92 User manual Scandomestic A/S · Thrigesvej 2 · DK-8600 Silkeborg T + 45 7242 5571 · F + 45 8622 5571 · scandomestic.
TRANSPORTATION AND INSTALLATION FREEZING METHODS 1 Place on level floor and remove the bottom packing, in order to decrease the shock and noise. 1 Do not put too much food into the freezer or exceed the loading line. The angle between the compartment body and ground should be no more than 45° 2 proper space should be allowed between foods to ensure cooling air circulation. 2 Enough space should be left between the freeze and the wall for ventilation.
Trouble Possibilities Compressor does not work Power is off Compressor keeps on working Check up Solutions Remarks The fuse is broken Check the fuse Replace the fuse The connection between plug and socket is not good Check the socket Repair or replace the socket If it is necessary please contact after-sales service for repair The circuit of input and output is out of use Make sure that the power is on Check the circuit with electric instrument The thermostat knob is not in the proper posit
Circuit diagram 4
