User Manual

Recording a Performance Run

To record a Performance Run you must first arm your

ScanGauge. Arming the ScanGauge is easy—simply

press the lower right function button next to ARM.

Arming the ScanGauge

ScanGauge will enter the Armed state and begin

monitoring your speed. The Performance Monitor

uses a MPH trigger to determine when to begin

recording.

The ScanGauge will remain in the Armed state until a

change in your speed is detected. Once a change is

detected, the Performance Monitor is “triggered,” and

recording automatically begins.

The Recording Screen

While recording, ScanGauge will display the

Recording Screen. This screen shows your vehicle’s

current speed and the elapsed time of the run. It will

continue to record data for a period of 24 seconds

or until ScanGauge detects a speed of 0 MPH. You

can also manually stop the record process anytime by

pressing the upper right function button next to STOP.

The Postrun Screen

Once the Performance Run is complete and recording

has stopped, ScanGauge will then display the Postrun

Screen. This screen allows you to immediately view or

save the recorded data, or rearm for a second run.

IMPORTANT: OBSERVE ALL SPEED LIMITS AND DRIVE SAFELY WHILE USING

PERFORMANCE MONITOR™.

Speed= STOP>

READY

Speed= 83 STOP>

Time = 8.3 Run

MPH

Trigger

Up to 24

Seconds

Performance Monitor Home Screen

Armed

Recording

Screen

Postrun

Screen

Pressing ARM discards any

unsaved data from a previous run.

Advanced Features