Specifications

22
Setting the speed-dependent volume
When the speed-dependent volume is activated the volume is automatically changed
in order to compensate for road and wind noise that occurs when you drive.
 Press the SETUP (9) button and tap on Audio.
Note
 Alternatively you can use the multi-function button (11) for setting if a main
menu for audio is activated.
 You cannot select the Audio button in the SETUP menu if the volume on
the device is switched off.
 To change the degree of volume adjustment, set Speed vol. to a value between 0
and 5.
Note
If the speed-dependent value is set to 0 then it indicates that the volume will
not increase with increasing vehicle speed.
If the speed-dependent value is set to 5 then it indicates that the volume will
increase to a maximum with increasing vehicle speed.
Setting the volume for voice guidance (navigation)
 Press the SETUP (9) button and tap on Navigation. If Voice Guidance is set to
"Off" then change the setting to "On".
 Set the volume to the desired level. Once you have changed the volume you will
hear the selected volume.
Setting the volume for the phone sound
The volume of the phone sound can be changed during a phone call using the multi-
function button (13).
When the volume has been changed the new setting will be saved by the system and
used as the standard setting for all future phone calls until the setting is changed
again.