Specifications

38
Bluetooth audio connection
General Information
Note
You can only connect Bluetooth devices to your system if you have installed
SCANIA handsfree equipment in the vehicle.
You can connect Bluetooth-activated audio sources that support the Bluetooth A2DP
music protocol to the system.
Important information
 The system only connects Bluetooth devices that support A2DP (Advanced Audio
Distribution Profile) version 1.2.
 The Bluetooth device must support AVRCP (Audio Video Remote Control Profile)
version 1.0 or higher. If the device does not support AVRCP then only the volume
can be controlled via the system.
Note
Read the manual for your Bluetooth device before you connect your Bluetooth
device to the system.
Pairing with a Bluetooth device
Important information
 A maximum of 5 devices can be paired with the system.
 Only one paired device can be connected to the system at a time.
 Normally the pairing only needs to be done once, unless the device is removed
from the list of paired devices.
Proceed as follows in order to pair a Bluetooth device with the system:
 Set Bluetooth to "On" in the BLUETOOTH SETUP menu.
 Tap on Pair New Device.
You are prompted to enter the PIN code ”1234” on the Bluetooth device.
 Activate the Bluetooth function on the Bluetooth device (if it is not already
activated).
 Activate the ”Detection mode” (read the manual for the Bluetooth device).
The system’s Bluetooth name is ”BT Scania”.