Specifications

39
 Follow the instructions on the Bluetooth device for pairing. If necessary, use the
PIN code ”1234”.
A message is shown when pairing is complete.
Note
 If another Bluetooth device was connected to the system earlier then the
device will now be disconnected.
 If the Bluetooth connection fails then you must repeat the pairing or read
the manual for the Bluetooth device.
 If the Bluetooth connection fails then you can remove already paired
Bluetooth devices, see the chapter ”Telephone”, subchapter ”General
Information” section ”Disconnecting a paired device”. Then repeat the
pairing.
Use
Preconditions
The following conditions must be fulfilled in order for it to be possible to use the
system’s Bluetooth music mode:
 The system’s Bluetooth function must be activated.
 The Bluetooth function on the external Bluetooth audio source must be activated
(see the manual for the device).
 Depending on the external Bluetooth audio source, it may be necessary to set the
device as ”visible” (see the manual for the device).
 The external Bluetooth audio source must be paired with and connected to the
system.
Activating Bluetooth music mode
 Press the MEDIA (16) button once or repeatedly in order to activate the Bluetooth
music mode.
You can now control the external audio source via the system.
 Tap on .
The audio is played back.
To play back the next audio track,
 Press the (1) button.
To pause or stop audio playback,
 tap on the button. To start playback again, tap on once again.